Product lines

9010 / 9030

PMM introduces the first Fully Digital fully CISPR Compliant EMC Receiver and Analyzer. Combined with the PMM 9030 the receiver extends its range from 10Hz to 3 GHz.

Product description in PDF format:

7000

One single click and the test immediately starts! Small, light and affordable by everyone, the latest PMM precompliance Receiver condenses 30 years experience in RF design, debugging and testing.

Product description in PDF format:

LISNs

Available in any size and for any line, these Line Impedance Stabilization Networks are fully compatible with all PMM receivers and, driven by PMM emission software, are the perfect complement in any automatic system.

63 Amps and 100 Amps models available !!

1000

Originally designed to meet the severe specifications of important Power Utilities, PMM 1000 has performance largerly exceeding what required by the current IEC Standards. The unique feature of simultaneous monitoring of the line source may allow the User to perform the tests without the expensive AC source.

Product description in PDF format:

6000s

The best way to solve conducted immunity problems. Fully automated system to perform conducted immunity test according to most accredited international standards. The system is composed by PMM 3000 low cost/high performance RF generator and PMM 6000N - 15W amplifier to guarantee 10 V output with any CDN chosen. The software has been designed to be fully expandible for future standards modifications and to support a wide variety of generators, power meters and CDNs or injection clamps.

Product description in PDF format:

3000

Wide band RF generator in the 10 kHz - 1 Ghz frequency range with an output level range of -80 to +10 dbm. The PMM 3000 has been designed to provide the best price/performance RF generator available today on the EMC market, covering 10 kHz to 1 Ghz frequency range. PMM 3000 control software enables the user to access all the available functions using only 4 keys, while the LCD display offers convenient view of all commands and shows all major parameters at once.

Product description in PDF format:

6000N

Wide band RF power amplifier in the 9 kHz - 230 Mhz frequency range with an output level range of 10 W and 15 W from 150 kHz to 80 MHz, the PMM 6000N is the perfect solution to raise the output power to the needed level.

Product description in PDF format:

6600

A pocket solution for all RF power measurements.
PMM 6600 is a simple and easy-to-use RF power meter mainly designed for EMC applications in order to calibrate CDNs and CLAMPs for conducted immunity systems or to measure the input power forwarded to antennas or cells. Using a bidirectional coupler and two PMM 6600 it is possible to measure the reflected as well the forwarded power. Thanks to its internal temperature compensation, PMM 6600 overcomes all temperature generated drifting problems.

Product description in PDF format:

1008

PMM 1008 is a magnetic immunity test system for making tests according to IEC 1000-4-8 and EN 61000-4-8 normatives. The system is composed by a programmable current generator and an induction square coil with mast and truck.

Product description in PDF format:

ACTIVE ROD ANTENNA RA-01

RA-01 is designed to provide a good solution to measure low level fields from 10 kHz to 30 MHz. It is a good companion of all receivers or spectrum analyzers to cover lower bandwidth application.

A wide range of antenna systems is also available. Each antenna is individually calibrated. Until 50 MHz the monopole antenna (active and passive rod) are calibrated with the substitution method.
The loop antennas are calibrated inside an anechoic chamber by measuring the current in a primary loop and calculating the induction field. The loop to be calibrated is placed in this known field and the antenna factor is measured.

Accessories

PMM Accessories

A wide range of accessories such as: Antennas, High Voltage Probes, Absorbing Clamps, Near Field Probes, Preamplifier, and other complete the range of products. This will enable the operator to always have the correct set-up for any EMC standard. Several accessories enlarge the capability of the systems in any test condition to offer a useful tool either to achieve the CE mark or for design debugging and pre-qualification testing.